Scanning... |
Prime Coat Pen
Details
The customer favourite for damp and stressed nails goes into the next round!
A handy pen with sponge applicator and central outlet. Either the nail is coated completely as usual or the prime coat is applied to the nail edges with the help of the applicator edge. The perfect solution for on the go!
Product characteristics
How to use
Applying Striplac Peel or Soak:
1. Degrease the nail with a cleaning pad.
2. Thoroughly polish the nail with the 2-step polishing file.
3. Choose a colour and polish the whole nail with a thin layer of colour.
4. Harden the polish for 60 sec. under the LED lamp.
5. Apply the top coat to the entire nail.
6. Cure the top coat for 90 sec. under the LED lamp.
7. Degrease the nail with the cleaning pads to remove the sweat layer.
Removal with Peel-Off:
1. Apply the Peel- Off activator to the nail plate and leave it on for a few minutes.
2. Using the hoof stick, press the lacquer to the side of the nail edge. Then peel the polish off the nail in one layer.
3. Then don't forget the care. Apply Care & Gloss care stick and you're done!
Removal with Soak-Off:
1. Apply a small amount of Soak-Off Liquid to the foil pads. Then place the soaked pad side on the nail plate and press the foil firmly around the finger so that the pads moisten the nail plate with acetone.
2. Leave the Soak-Off Pads on for 5–10 minutes and the polish is off!
3. Afterwards, don't forget the care. Apply Care & Gloss care pen and you're done!