Scanning... |
- - 30 %
- Limited Edition
Striplac Starter Kit Pro Exclusive
Details
Striplac is 10 years and that wants to be celebrated! The Striplac Peel or Soak Starter Kit Standard contains all the products you need for a Striplac lacquer finish:
- To prepare the natural nail before the Striplac Peel or Soak manicure.
- Improves adhesion on damp and stressed nail surfaces.
- Minimises the risk of lifting for extra long-lasting durability.
The set contains:
- 1x Striplac Peel or Soak Flower Crown (5 ml)
- 1x Striplac Lamp Exclusive Rosé
- 1x Striplac Peel or Soak Top Coat (5 ml)
- 1x Striplac Peel or Soak Cleaning Pads (50x)
- 1x Striplac Hoofsticks
- 1x Striplac Peel of Activator (5 ml)
- 1x Striplac High Speed Polishing File 2-fold
- 1x Striplac Soak Off Remover Wraps (10x)
- 1x Striplac Soak Off Liquid (50 ml)
Product characteristics
How to use
Applying Striplac Peel or Soak:
1. Degrease the nail with a cleaning pad.
2. Thoroughly polish the nail with the 2-step polishing file.
3. Choose a colour and polish the whole nail with a thin layer of colour.
4. Harden the polish for 60 sec. under the LED lamp.
5. Apply the top coat to the entire nail.
6. Cure the top coat for 90 sec. under the LED lamp.
7. Degrease the nail with the cleaning pads to remove the sweat layer.
Removal with Peel-Off:
1. Apply the Peel- Off activator to the nail plate and leave it on for a few minutes.
2. Using the hoof stick, press the lacquer to the side of the nail edge. Then peel the polish off the nail in one layer.
3. Then don't forget the care. Apply Care & Gloss care stick and you're done!
Removal with Soak-Off:
1. Apply a small amount of Soak-Off Liquid to the foil pads. Then place the soaked pad side on the nail plate and press the foil firmly around the finger so that the pads moisten the nail plate with acetone.
2. Leave the Soak-Off Pads on for 5–10 minutes and the polish is off!
3. Afterwards, don't forget the care. Apply Care & Gloss care pen and you're done!